Product Overview
The Schneider ELAU SH30552P02F2000 is a PacDrive SH055 servo motor corresponding to the legacy model SH055/80009/0/0/00/00/00/11/00. It provides 0.60 kW rated power, 0.72 Nm rated torque and an 8000 RPM rated speed.
This version is equipped with a cylindrical smooth shaft, an SKM36 multi-turn Hiperface encoder and an integrated 24 VDC holding brake. It does not include a shaft sealing ring and uses the IP54/IP65 protection configuration.
The multi-turn encoder allows the motion-control system to retain extended position information, while the holding brake is intended to hold the shaft when power is removed. The brake is not a service brake and must not be used as the primary method of dynamically stopping the machine axis.
Main Features
- Exact commercial reference: SH30552P02F2000
- Legacy model: SH055/80009/0/0/00/00/00/11/00
- Rated power: 0.60 kW
- Rated speed: 8000 RPM
- Rated torque: 0.72 Nm
- Standstill torque: 0.80 Nm
- Peak torque: 2.50 Nm
- Smooth cylindrical shaft
- SKM36 multi-turn Hiperface encoder
- Integrated holding brake
- 0.80 Nm brake holding torque
- Without shaft sealing ring
Technical Specifications
| Model |
SH30552P02F2000 |
| Legacy Model |
SH055/80009/0/0/00/00/00/11/00 |
| Series |
PacDrive SH055 / Lexium SH3 055 |
| Motor Type |
Permanent-magnet three-phase synchronous servo motor |
| Rated Power |
0.60 kW |
| Rated Speed |
8000 RPM |
| Maximum Mechanical Speed |
9000 RPM |
| Rated Torque |
0.72 Nm |
| Standstill Torque |
0.80 Nm |
| Peak Torque |
2.50 Nm |
| Rated Current |
1.10 Arms |
| Standstill Current |
1.20 Arms |
| Peak Current |
4.80 Arms |
| Torque Constant at 120°C |
0.70 Nm/Arms |
| Back EMF at 120°C |
40 Vrms/krpm |
| Phase-to-Phase Resistance |
17.4 ohm at 20°C |
| Phase-to-Phase Inductance |
35.3 mH |
| Rotor Inertia |
0.096 kg·cm² |
| Flange Size |
55 mm |
| Shaft Type |
Cylindrical smooth shaft |
| Shaft Size |
9 mm diameter * 20 mm extension |
| Encoder |
SKM36 multi-turn, 128 sine/cosine periods, Hiperface |
| Holding Brake |
Yes |
| Brake Holding Torque |
0.80 Nm at 120°C |
| Brake Supply |
24 VDC, +6% / -10%, approximately 10 W |
| Shaft Sealing Ring |
No |
| Protection Configuration |
IP54/IP65 |
| Connector |
Angular 90-degree round connector |
| Cooling |
Self-cooled |
| Overall Length |
Approximately 181 mm |
| Approximate Net Weight |
1.58 kg |
| Lifecycle |
Legacy / discontinued product |
Compatible System and Applications
The SH30552P02F2000 is suitable for PacDrive machine axes requiring multi-turn position feedback and shaft holding when power is removed. Typical applications include vertical axes, lifting mechanisms, positioning tables, format adjustment, packaging machinery and automated material-handling systems.
The brake control must be coordinated by the installed servo drive and machine controller. Confirm the brake-voltage supply, switching circuit, release timing and axis safety design.
Maintenance and Replacement Notes
Verify the SKM36 multi-turn encoder and brake configuration before replacement. A single-turn encoder version may require project changes and a new machine reference procedure.
Test the brake holding function and confirm that the brake releases fully before enabling motor movement. A dragging or incorrectly powered brake can cause motor overheating or mechanical damage.
Confirm the smooth shaft, coupling, motor cable, encoder cable, brake wiring, servo-drive compatibility, controller project and feedback parameters.
Related Models
SH30552P02F2100 is the related smooth-shaft multi-turn brake version with a shaft sealing ring and IP65/IP65 configuration. SH30552P02A2000 is the corresponding version without a brake.
SH30552P01F2000 uses SKS36 single-turn feedback with a brake. SH30552P12F2000 combines a keyed shaft, SKM36 multi-turn encoder and brake.
Inquiry and Supply Notes
Please provide the complete motor nameplate, brake information, encoder details, shaft photographs and connector photographs. Also provide the drive and controller references.
Brake function, encoder type, shaft configuration, product condition, testing status, availability and delivery time must be confirmed before quotation.
|
|
Schneider ELAU SH30552P02F2000 PacDrive SH055 Servo Motor Images
|
